Fiber Optic Plastic Straight Quick Connector
Microduct Couplers and End Stops are of a quick connect design, with pull ring release and a clear barrel for viewing. The clear barrel allows for visual inspection to determine if the duct ends are properly seated in the coupler during installation, or if the cable has passed through the coupler during the installation phase.
A fiber optic plastic straight quick connector, also known as a field-installable connector or fast connector, is a type of connector used to terminate or connect fiber optic cables in a quick and easy manner. It allows for on-site or field installations without the need for specialized tools or equipment.
Microduct Couplers are available two configurations; straight and transition to allow the connection of two microducts with different outer diameters. Microcouplers are rated at 175 psi with a safety factor of 4:1. Sizes and specification are listed below:
.....
5mm.............Vacuum to 175
7mm.............Vacuum to 175
8mm.............Vacuum to 175
8.5 mm.............Vacuum to 175
10 mm..............Vacuum to 175
12 mm..............Vacuum to 175
12.7mm.............Vacuum to 175
14mm.............Vacuum to 175
16mm.............Vacuum to 175
18mm.............Vacuum to 175
Temp. Range.....-30 degree F (-34 degree ) to +180 degree F (85 degree )
Vacuum rating to 28 inches of Hg at room temperature
are used when it is necessary to access cables at mid-span for placing slack coils. Available to fit 12mm and 12.7mm O.D. microducts.
are threaded into microducts internally for pressurizing microducts prior to installing. Microduct End Caps keep microducts from imploding and add stiffness during the installation process. Available to fit 10mm and 12 and 12.7mm microducts.
ڈاؤن لوڈ، اتارنا ٹیگ:
انکوائری بھیجنے
